Webinars
On this page you will find recordings of past webinars. To view current and upcoming webinars, visit the webinar section of our home page or our events page! To request access to the link for a webinar’s recording, click the title of the desired webinar, then click the title next to the arrow in the blue circle to access the link request.
Stop Honing by the Numbers!
Stop Honing by the Numbers! Thinking outside the box comes naturally for Lake Speed, Jr. of Total Seal Piston Rings and Ed Kiebler of Rottler
Dissecting The 3.6L Pentastar Engine!
Dissecting The 3.6L Pentastar Engine! Doug Anderson, well known speaker, technical specialist and magazine contributor shares his vast knowledge of the 3.6L Pentastar engine based
The Daunting Dilemmas of Duramax Differences!
The Daunting Differences of Duramax Differences! Cass Choate of Choate Engineering Performance discusses the Duramax family of V8 diesel engines delving into the good and
There’s A Right Way and A Wrong Way To Remove Mass and Install Heavy Metal!
There’s A Right Way and A Wrong Way To Remove Mass and Install Heavy Metal! Balancing authority Randy Neal of CWT Industries is one of
They Aren’t Your Father’s Fasteners Anymore!
They Aren’t Your Father’s Fasteners Anymore! Tim Golema, Senior Technical Sales Specialist Aftermarket for MAHLE Aftermarket takes you through the history of fasteners from the
Understanding The 2.7L Ford Ecoboost Engine
Understanding The 2.7L Ford Ecoboost Engine Doug Anderson, well known speaker, technical specialist and magazine contributor shares his vast knowledge of this engine based on
Choosing The Right Connecting Rod Is Critical!
Choosing The Right Connecting Rod Is Critical Nick Bucalis of Bullet Racing Engines will help you understand how to make the right choice when it
Bearings and Torsional Dynamics Influence the Ways Balancing Releases Horsepower!
Bearings and Torsional Dynamics Influence the Ways Balancing Releases Horsepower! This webinar is a combined program featuring Dan Begle of MAHLE Aftermarket, Aaron Neyman of
Fuel Injection Failure Analysis
Fuel Injection Failure Analysis Greg Arsenault, VP of AMBAC, shares his and AMBAC’s vast knowledge of manufacturing and remanufacturing fuel injection systems and injectors in
Dynamic Overlap Flow
Dynamic Overlap Flow Darin Morgan brings an all-new topic to the table by discussing air flow into the chamber related to valve placement and the
